|Small Feed Pump||When tested: the pump sounds like it runs but no product flows.|
Test: Open second outlet on pump and see if product flows through the short alkathene.
|If pumps OK through other outlet then the Feed line is likely to be blocked.|
If still not pumping fluid then inlet valves may be gritted up.
|Cleaning inlet valves on feed pump.|
|Small Feed Pump||When tested the pump only hisses air out of the exhaust.||Oiler may be empty or not not dropping oil.|
Check oil level on oiler/lubricator.
To restart remove the oiler and put oil directly in the air chamber of the pump, refit and retest.
|Lubricating seized feed pump.|
|Electrical - Level Sensor Probe||The level sensor probe is the high level sensor for filling the conedose||The factory settings are adequate for conedose use, if settings change or need adjustment use the guide. Note the guide requires removing the back cover, this is best done by an electritican.||Level Sensor Probe adjustment.|